Prismatic Rechargeable LiFePO4 Battery
Prismatic LiFePO4 battery
Voltage at end of Discharge:
Maximum Continuous Discharge Current
Voltage at end of Charge:
Maximum Continuous Charge Current
Constant Current 0.2C
End Voltage 2.0V
@ 80% DOD
Application: solar street light, solar energy storage, Forklift, etc...
2.High density of energy
5.Low internal resistance
6.Long cycle life, chargeable up to 2000 times
7.No memory effect
8.Doesn't contain Mercury, No fire, No explosion, No leakage
1.Short circuit test,no explosion,no fire
2.Heating test,no explosion,no fire
3.High safety:Over-charging test,no explosion,no fire,over-current,short circuit
4.Drop test,no fire,no explosion,no smoking
5.High temperature and high humidity,no leakage
(1) Output with high efficiency: Standard discharge current is 0. 3°C-0.8°C, instant impulse discharge current is 10C for 10 seconds.
(2)Good performance under high temperature, it could work under 65°C temperature. The battery structure is safe and good
(3)Good performance under low temperature discharge capacity decreases to over 78% under 0°C and discharge capacity reduced to over 70% under-20°C
(4) Good safety performance: When the pressure inside the battery is too large, the one-way safety valve will release gas and heat to make sure battery perform well.When the internal
Pressure reaches a certain level, the valve will be open immediately which can protect the battery from burning and explosion.
(5) Good cycle life time, the discharge capacity is still over 80% after 3000 cycle times of single cell (80‰DOD)
6)It can fast charging. It could be charged to 80% within 20 minutes and charged full with 2-3h
(7) Low cost.
(8) No pollution during manufacture and usage